Product Specifications


Steel sheet is a type of sheet metal with steel property. Notable features of steel include gloss, beauty, smooth surface, no rust or corrosion over time.

Steel sheets such as galvanized sheets and oil sheets are offered in rolls and sheets.

Steel sheet is a product that is either square or rectangular. It is produced in various sizes and sizes. The stainless steel sheets are a little thick and their surface is very smooth and glossy, and the gloss is because of the polished surface.
These sheets all have steel features. That is, they are not easily eaten and are stainless.
Steel sheets are usually available in two forms. Or they are a page and have certain dimensions. Or there are big rolls.

steel sheet
The alloy, which is based on iron and has less than 2% carbon, is called steel or steel.

Depending on the type and amount of other elements present in it, mechanical properties such as hardness and ductility are determined.

Increasing the amount of carbon increases hardness and strength, but decreases the amount of plasticity.

Types of stainless steel grids
Series 2 or stainless steel (non-magnetic): Iron, chromium, nickel alloy with less than 0.5% carbon.
Series 2 or stainless steel (magnetic): Iron alloy, chromium with a carbon content of less than 0.5%.
Series 2 and its applications
The most common grade is the stainless steel, which is a classic 1/2.
It is the most common grade after grade 2 and is used in the food and surgical industries, in addition to its molybdenum alloy to prevent corrosion. It is also used in the marine industry because of its high resistance to chlorine compared to Grade 4.
 Series 2 Steel Sheet
است It is wear resistant but has little resistance to corrosion.
کار Cutlery has good polishing ability.
۴۳۰ Decorative grid is used for example in interior decoration of cars. Has good plasticity at low temperature and is corrosion resistant.
What is the difference between steel 1 and 2?
Steel 2 contains 5% chromium and 2% nickel, while steel 2 contains 5% chromium, 2% nickel and 2% molybdenum. Molybdenum is added to help resist corrosion caused by chloride (such as seawater).

Properties of stainless steel
Corrosion resistant
Attractive appearance
Heat resistance
Fully recyclable
Long and useful life compared to payment
What Makes Stainless Steel Stainless?
Steel is corrosion-resistant when it contains at least 1.5% chromium. Chromium, after being mixed with oxygen, forms chromium oxide, which forms a layer on stainless steel. This layer is not visible but causes the connection between the air and the metal to disappear and the steel to remain healthy. Higher amounts of chromium, as well as some other elements in the nickel-molybdenum alloy, reinforce this layer and increase the anti-rust property.

Bazaar Steel Shop offers all kinds of pipes, fittings and valves including steel pipe and steel plate.

The stainless steel sheet has several clean features as follows:
Don't take the steel sheet
Glossy steel sheet
Matte steel sheet
Scratched steel sheet
Coated steel sheet
Refractory steel sheet
Anti-acid stainless steel sheet
Usually rolls of steel sheets are produced in two widths of 1 cm and 2 cm.

Steel sheets are available in thicknesses from 1mm to 4mm.

Fabric steel sheets are available in 2 * 1 and 2 * 2 cm sizes.

Types of stainless steel sheets are manufactured and manufactured from rolled stainless steel castings depending on the thickness. The most important steel sheets available in Iran are steel sheets - Taiwan, steel sheets - Taiwan, South Korea steel sheets and Columbus steel sheets.

Can stainless steel be recyclable?
Stainless steel is 2% recyclable. The scrap steel is melted and molded again. Between 2 and 4 percent of stainless steel production is done through waste recycling.
Can stainless steel work at very high or low temperatures?
Yes stainless steel has good resistance to very high temperatures (up to -5 ° C) and very low (up to -5 ° C).
Who made the steel names (1, 2, ...)?
The American Iron and Steel Society for the first time categorized and named stainless steels and provided physical and chemical specifications as well as manufacturing guidelines.

Do stainless steel attract magnets?
Nickel-plated Series 7 stainless steels are not absorbed by the magnet, whereas the N-series stainless steels are absorbed by chromium.
What is the sign after the name of Stainless Steel (like 1)?
The acronym indicates that the carbon content of the alloy has been reduced to less than 0.5%. This low carbon content makes the protective oxide layer still present on the surface after welding.

Steel sheet applications
Steel sheet is used in the sugar industry and in the mill industry. Another food industry where these sheets are used. The oil industry can be named.
These sheets are also used in the shipbuilding industry as well as in pump manufacturing.
The most important and most prestigious industry in the world, petrochemical, is the most widely used steel sheet industry.